Sidewall / Step Flashing

Sidewall / Step Flashing

Wakaflex® on plain tiles or double lapped slates


Wakaflex® can be used to finish a side abutment or a chimney. Plain tiles of slates should be covered with Wakaflex® soakers and a stepped cover flashing. Spacers should be cut from Wakaflex® and shaped so that they run 65mm up the wall. The soaker should not show beyond the length of the tile or slate. Cover the soaker upstands with step flashing by a minimum of 30mm.

 

Wakaflex® on interlocking slates or flat tiles


Use a step and cover flashing turned up the wall by approx 150mm, and covering the tile surface by a minimum of 150mm. When using flat interlocking tiles a GRP secret gutter should always be used in conjunction with the flashing.

 

Wakaflex® on profile tiles


Use a step and cover flashing turned up the wall by a minimum 150mm and extending over the tile surface by a minimum of 150mm ensuring at least one roll is covered.

 

Any questions about applying our lead-free flashing or any other Haus Profi product? Just get in touch, we’re here to help.
Call us on: 0845 600 4427 
or
email: info@haus-profi.co.uk